Description
iPhone 16 Screen Replacement: DIY Repair Guide
Follow this step-by-step guide to replace your cracked iPhone 16 screen using a DIY kit.
📦 Tools & Parts You’ll Need
- iPhone 16 Replacement Screen (OLED, with pre-installed adhesive) – Buy from:
- MobileSentrix (Best quality)
- iFixit (Includes tools)
- DIY Repair Kit (Includes):
- Precision screwdrivers (P2, Y000)
- Suction cup & plastic pry tools
- Tweezers & spudger
- Adhesive strips
- Heat gun/hairdryer
🔧 Step-by-Step Instructions
⚠️ Before You Start
- Back up your iPhone (iCloud or iTunes).
- Power off the device.
- Work in a clean, well-lit area (avoid dust).
1. Remove the Back Glass (iPhone 16 is Rear-Opening)
- Heat the edges with a heat gun/hairdryer for 2–3 minutes to soften adhesive.
- Apply suction cup near the bottom edge and gently pry open with a plastic tool.
- Lift slowly to avoid damaging cables.
2. Disconnect the Battery
- Locate the battery connector (under a metal bracket).
- Remove the P2 screws and lift the connector with a spudger.
3. Remove the Old Screen
- Disconnect the display flex cables (remove screws first).
- Lift the screen assembly from the top.
4. Install the New Screen
- Test the new screen before securing (check touch, Face ID).
- Transfer components (Face ID sensor, earpiece speaker if needed).
- Reconnect all cables and secure screws.
5. Reassemble & Seal
- Reconnect the battery and replace screws.
- Apply new adhesive and press the back glass firmly for 30 seconds.
âś… Final Checks
- Test touch, Face ID, and speakers.
- Ensure no gaps between screen and frame.
- Charge the phone to confirm no issues.
⚠️ Common Mistakes to Avoid
- Not disconnecting the battery (risk of shorts).
- Forcing connectors (can damage cables).
- Using metal tools (may scratch components).
đź“Ś Pro Tips
- If Face ID fails, realign the sensor.
- If the screen is unresponsive, recheck cables.
- Watch iFixit’s video guide for visual help.
Reviews
There are no reviews yet.